European Committee for Standardization
CEN/TC 69 - Published standards
Back to codes and standards index
| Standard reference | Title | Citation in OJ | Directive |
|---|---|---|---|
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves | No | 97/23/EC |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements | No | 93/38/EEC |
| EN 1074-2:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves | No | 93/38/EEC |
| EN 1074-2:2000/A1:2004 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves | No | 93/38/EEC |
| EN 1074-3:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves | No | 93/38/EEC |
| EN 1074-4:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves | No | 93/38/EEC |
| EN 1074-5:2001 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves | No | 93/38/EEC |
| EN 1074-6:2008 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants | No | - |
| EN 1171:2002 | Industrial valves - Cast iron gate valves | Expected | 97/23/EC |
| EN 12266-1:2003 | Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements | Cited in OJ C 115 (1999-04-28) |
97/23/EC |
| EN 12266-2:2002 | Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements | No | 97/23/EC |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves | Expected | 97/23/EC |
| EN 12334:2001 | Industrial valves - Cast iron check valves | Expected | 97/23/EC |
| EN 12334:2001/A1:2004 | Industrial valves - Cast iron check valves | Expected | 97/23/EC |
| EN 12334:2001/AC:2002 | Industrial valves - Cast iron check valves | Expected | 97/23/EC |
| EN 12351:2010 | Industrial valves - Protective caps for valves with flanged connections | No | - |
| EN 12516-1:2005 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | Expected | 97/23/EC |
| EN 12516-1:2005/AC:2007 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | Expected | 97/23/EC |
| EN 12516-2:2004 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | Expected | 97/23/EC |
| EN 12516-3:2002 | Valves - Shell design strength - Part 3: Experimental method | Expected | 97/23/EC |
| EN 12516-3:2002/AC:2003 | Valves - Shell design strength - Part 3: Experimental method | Expected | 97/23/EC |
| EN 12516-4:2008 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | Cited in OJ C 46 (2009-02-25), C 111 (2008-05-06) |
97/23/EC |
| EN 12567:2000 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests | No | 97/23/EC |
| EN 12569:1999 | Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests | No | - |
| EN 12569:1999/AC:2000 | Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests | No | - |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element | No | 97/23/EC, 89/106/EEC |
| EN 12627:1999 | Industrial valves - Butt welding ends for steel valves | No | 97/23/EC |
| EN 1267:1999 | Valves - Test of flow resistance using water as test fluid | No | 97/23/EC |
| EN 12760:1999 | Valves - Socket welding ends for steel valves | No | 97/23/EC |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves | No | 97/23/EC |
| EN 13397:2001 | Industrial valves - Diaphragm valves made of metallic materials | Cited in OJ C 171 (2002-07-17) |
97/23/EC |
| EN 1349:2009 | Industrial process control valves | Expected | 97/23/EC |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves | Expected | 97/23/EC |
| EN 13774:2003 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements | No | 97/23/EC |
| EN 13789:2010 | Industrial valves - Cast iron globe valves | Expected | 97/23/EC |
| EN 14141:2003 | Valves for natural gas transportation in pipelines - Performance requirements and tests | No | - |
| EN 14341:2006 | Industrial valves - Steel check valves | Expected | 97/23/EC |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards | No | 97/23/EC, 89/106/EEC |
| EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards | No | 97/23/EC |
| EN 1503-3:2000 | Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards | No | 97/23/EC |
| EN 1503-3:2000/AC:2001 | Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards | No | - |
| EN 1503-4:2002 | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards | No | 97/23/EC |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment | No | - |
| EN 15389:2008 | Industrial valves - Performance characteristics of thermoplastic valves when used as construction products | No | 89/106/EEC |
| EN 15714-1:2009 | Industrial valves - Actuators - Part 1: Terminology and definitions | No | 97/23/EC |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements | No | 97/23/EC |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements | No | 97/23/EC |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements | No | 97/23/EC |
| EN 19:2002 | Industrial valves - Marking of metallic valves | Cited in OJ C 171 (2002-07-17) |
97/23/EC, 89/106/EEC |
| EN 1983:2006 | Industrial valves - Steel ball valves | Expected | 97/23/EC |
| EN 1984:2010 | Industrial valves - Steel gate valves | Expected | 97/23/EC |
| EN 26553:1991 | Automatic steam traps - Marking (ISO 6553:1980) | No | 97/23/EC |
| EN 26554:1991 | Flanged automatic steam traps - Face-to-face dimensions (ISO 6554:1980) | No | 97/23/EC |
| EN 26704:1991 | Automatic steam traps - Classification (ISO 6704:1982) | No | 97/23/EC |
| EN 26948:1991 | Automatic steam traps - Production and performance characteristic tests (ISO 6948:1981) | No | - |
| EN 27841:1991 | Automatic steam traps - Determination of steam loss - Test methods (ISO 7841:1988) | No | 97/23/EC |
| EN 27842:1991 | Automatic steam traps - Determination of discharge capacity - Test methods (ISO 7842:1988) | No | 97/23/EC |
| EN 28233:1990 | Thermoplastics valves - Torque - Test method (ISO 8233:1988) | No | 97/23/EC, 93/38/EEC, 90/531/EEC, 89/106/EEC |
| EN 28659:1990 | Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989) | No | 97/23/EC, 93/38/EEC, 90/531/EEC, 89/106/EEC |
| EN 558:2008 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves | No | 97/23/EC |
| EN 593:2009 | Industrial valves - Metallic butterfly valves | Cited in OJ C 226 (2009-09-19) |
97/23/EC |
| EN 736-1:1995 | Valves - Terminology - Part 1: Definition of types of valves | No | 97/23/EC |
| EN 736-2:1997 | Valves - Terminology - Part 2: Definition of components of valves | No | 97/23/EC |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms | No | - |
| EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) | No | - |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) | No | 97/23/EC |
| EN ISO 15848-1:2006 | Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006) | No | - |
| EN ISO 15848-2:2006 | Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2006) | No | - |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) | Expected | 97/23/EC |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) | Expected | 97/23/EC |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) | Expected | 97/23/EC |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) | Expected | 97/23/EC |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) | Expected | 97/23/EC |
| EN ISO 17292:2004 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004) | No | - |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) | Expected | 97/23/EC |
| EN ISO 4126-1:2004 | Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004) | Expected | 97/23/EC |
| EN ISO 4126-1:2004/AC:2006 | Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004) | Expected | 97/23/EC |
| EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003) | No | 97/23/EC |
| EN ISO 4126-2:2003/AC:2006 | Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003) | No | 97/23/EC |
| EN ISO 4126-3:2006 | Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) | Expected | 97/23/EC |
| EN ISO 4126-4:2004 | Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004) | Expected | 97/23/EC |
| EN ISO 4126-5:2004 | Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004) | Expected | 97/23/EC |
| EN ISO 4126-5:2004/AC:2008 | Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004/Cor 1:2006/Cor 2:2007) | Expected | 97/23/EC |
| EN ISO 4126-6:2003 | Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003) | No | 97/23/EC |
| EN ISO 4126-6:2003/AC:2006 | Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003) | No | 97/23/EC |
| EN ISO 4126-7:2004 | Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2004) | No | 97/23/EC |
| EN ISO 4126-7:2004/AC:2008 | Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2004/Cor 1:2006) | No | 97/23/EC |
| EN ISO 5210:1996 | Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991) | No | 97/23/EC |
| EN ISO 5211:2001 | Industrial valves - Part-turn actuator attachments (ISO 5211:2001) | No | 97/23/EC |
