Search

 

codes & standards

Back to codes and standards index

Carbon and Stainless Steel Flanges - ASME/ANSI Class 2500

ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings - Class 2500 Flanges - outside and inside diameters, bolt circles, numbers and diameters of bolts for Weld neck, Threaded, Slip-on, Lap joint, Socket weld and Blind flanges.

Carbon and stainless steel qualities according ASME B16.5 Table 1A.

Pipe Size
(inches)		 Outside Diameter
(inches)		 Inside Diameter
(inches)		 Number of Bolt Holes Bolt Hole Diameter
(inches) 1)		 Bolt Circle
(inches)
1/2 5-1/4 - 4 7/8 3-1/2
3/4 5-1/2 - 4 7/8 3-3/4
1 6-1/4 - 4 1 4-1/4
1-1/4 7-1/4 - 4 1-1/8 5-1/8
1-1/2 8 - 4 1-1/4 5-3/4
2 9-1/4 - 8 1-1/8 6-3/4
2-1/2 10-1/2 - 8 1-1/4 7-3/4
3 12 - 8 1-3/8 9
4 14 - 8 1-5/8 10-3/4
5 16-1/2 - 8 1-7/8 12-3/4
6 19 - 8 2-1/8 14-1/2
8 21-3/4 - 12 2-1/8 17-1/4
10 26-1/2 - 12 2-5/8 21-1/4
12 30 - 12 2-7/8 24-3/8

1) Recommended bolts are 1/8 smaller than the nominal bolt hole diameters shown.

 
pipingdesigners.com home page pipingdesigners.com home page Get the RSS Feed from the Forum pipingdesigners.com on Facebook pipingdesigners.com on twitter pipingdesigners.com on LinkedIn About pipingdesigners.com pipingdesigners.com Forum pipingdesigners.com Codes & Standards pipingdesigners.com Links pipingdesigners.com Tools pipingdesigners.com Tips pipingdesigners.com Training pipingdesigners.com Jobs Board pipingdesigners.com home page About pipingdesigners.com pipingdesigners.com Forum pipingdesigners.com Codes & Standards pipingdesigners.com Links pipingdesigners.com Tools pipingdesigners.com Tips pipingdesigners.com Training pipingdesigners.com Jobs Board pipingdesigners.com Home Page